When the screen is off, touch the display to turn on the screen. 6 Reset • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed. Common operations Ñ Turning on the power 1 Press the button. Ñ Turning off the power 1 Press and hold the button.
If you have actually identified a blown fuse and have successfully replaced it, your head unit should work just fine now. But the problem can also be caused by bad wiring. Carefully remove the head unit and see if there are any wires that are not connected properly.
I have a kennwood head unit in my car that I installed probably 4-5 years ago and have had no problems with it until this last month. I started noticing it shutting off randomly while driving. It would do this at basically all volumes, but if I would turn it up the head unit shutting off would follow shortly. But back to your problem, 3 wires alone should turn on your new deck. If not, make sure the deck didn't fail. also if putting the stock back and that doesn't work, make sure all the cables attached to the stock deck is also connected and see if it turns on. If that turns on, its your deck or wiring. Put the face plate aside and locate the small circle button labelled "Reset" on the main component. Make sure the car power is on. Press and hold the reset button with a pointed edge tool for 5 seconds. Add a comment. Conclusion. To reassemble your device, follow these instructions in reverse order. Give the author +30 points! . 338 198 429 150 237 404 434 334

kenwood head unit not turning on